2026-2027 C3 Flash Talks/ Midpoint Showcase Schedule
|
Start (PST) |
End (PST) |
Team Name |
University |
Track |
Short Mission Statement (click to expand) |
|---|---|---|---|---|---|
|
8:00 AM |
8:15 AM |
Pre-event Technical Check |
|||
|
8:15 AM |
8:30 AM |
Overview: Objective, Best Mentor Nominations, Best Paper Award |
|||
|
8:30 AM |
8:37 AM |
Orbital Jackets |
Georgia Institute of Technology |
Track 5: In-Space for Earth |
The Orbital Jackets team has developed a project titled Optical-Fiber Refinement, Curing, & Automated Synthesis (O.R.C.A.S) that aims to provide a proof of concept for an automated end-to-end microgravity manufacturing platform for Ge-Sb-Se based optical fibers.Traditionally, the in-space manufacturing of optical fibers has been largely limited to a material called ZBLAN. This material experiences great improvements in mitigating transmission loss and defects when manufactured in an environment that removes effects of sedimentation and convection. However, ZBLAN struggles in applications that revolve around the mid-infrared region, and faces challenges with chemical stability once returned to Earth. Therefore, the Orbital Jackets team has initiated the development of an autonomous payload that manufactures and validates Ge-Sb-Se fibers which perform better in the mid-infrared region and have high commercial value in areas such as medical imaging, remote gas sensing, and defense applications. |
|
8:38 AM |
8:45 AM |
LUCID |
Embry-Riddle Aeronautical University, Prescott |
Track 2: Lunar Operations |
The Lunar Utility Construction and Infrastructure Development (LUCID) team is designing a compact lunar rover that clears and levels regolith to prepare a stable site for NASA’s Fission Surface Power reactor.LUCID will flatten the regolith using a plow, leaving a prepared pad for installation of the reactor. Its second function involves creating berm structures with a static mold to protect nearby astronauts from radiation exposure. The team is developing a half-scaled Earth-based prototype to be tested at NASA’s Marshall Space Flight Center, which will include an aluminum chassis and a UHMWPE plow blade. A full scale design will be presented for the C3 challenge to demonstrate how rovers could lay the groundwork for a sustained human presence on the Moon. |
|
8:46 AM |
8:53 AM |
Avengers (assemble) |
Purdue University |
Track 2: Lunar Operations |
We are developing a robot-mateable, self-verifying interface that lets uncrewed robots connect separately landed lunar assets into one power and data network and certify each connection as it is made.NASA’s Moon Base plan requires habitats, landers, and power systems to be mated without crew, tolerating terrain misalignment, regolith dust, and lunar night while passing up to 6 kW of 120 VDC power. Today’s docking systems were built for orbit, published dust-tolerant connectors assume an astronaut’s gloved hand, and teleoperation at 2.6 s round-trip latency is too slow to close the gap. Our approach instruments the tool and interface so each joint is aligned, latched, and electrically and mechanically verified from its own sensor signature, with de-mating for reconfiguration. The same verified-mating approach applies to in-space assembly, where robots must likewise make connections no one can inspect. |
|
8:54 AM |
9:01 AM |
V Ad Lunam (VAL) |
University of Colorado Colorado Springs |
Track 2: Lunar Operations |
The V Ad Lunam (VAL) team will design and prototype a modular mobile robotic system equipped with a highly articulated arm and integrated sensor suite to inspect lunar site conditions, collect data, and validate lunar surface preparation and infrastructure efforts.Future Fission Surface Power (FSP) installations, lunar facilities, and surveying missions will require systems that will inspect excavation conditions, assess site foundations, and collect visual and geometric data. This approach will improve environmental safety, aid in FSP site preparation, enable sustained lunar operations, and support future missions. |
|
9:02 AM |
9:09 AM |
Mahina Menehune |
University of Hawai’i at Mānoa |
Track 1: Orbital Manufacturing and Assembly |
Mahina Menehune will demonstrate the in-orbit production and robotic assembly of modular, interlocking sintered ilmenite bricks for radiation-shielding structures in lunar orbit.Hosted in Arkisys’s Bosuns Locker, a laser sintering system will convert ilmenite-rich lunar regolith simulant into uniform, interlocking bricks, enabling assembly of configurable structures in orbit. By utilizing solid residues from lunar oxygen production and leveraging lower lunar delta-V requirements, Earth-launched shielding mass and long-term construction costs for scalable orbital habitats and shields are reduced, while substantially decreasing Earth resupply dependence for shielding and advancing self-sustaining ISRU architectures. Mahina Menehune’s goal is to validate lunar regolith brick production and robotic assembly in orbit, advancing the capabilities needed to construct passive radiation shields for orbital habitats. |
|
9:10 AM |
9:17 AM |
Vanderbilt Engineering |
Vanderbilt University |
Track 1: Orbital Manufacturing and Assembly |
The Vanderbilt Engineering Design Team aims to develop a scalable in-space polymer manufacturing line using injection molding to produce construction components while demonstrating adaptability for future applications.In-space manufacturing could reduce the volume and cost of transporting construction materials and fully assembled structures from Earth. This project will investigate polymer processing methods and material systems suited to the challenging thermal conditions of space, including materials that can be stored, transported, and delivered in a processable form. The proposed manufacturing line will include three primary stages: material feeding, clamping and molding, and component extraction. These stages will enable the consistent production of repeatable parts, such as truss elements, bricks, and connectors, which can be assembled into larger, stronger structures. Potential long-term applications include infrastructure supporting future space observatories, lunar installations, and other large-scale missions. This work aims to establish a foundation for adaptable, scalable infrastructure beyond Earth. |
|
9:18 AM |
9:25 AM |
Zero-G Jackets |
Georgia Institute of Technology |
Track 1: Orbital Manufacturing and Assembly |
Demonstrate repeatable on-orbit fabrication of structural components from metallic wire feedstock and assembly of those components into functional structures.The proposed orbital manufacturing capability executes an autonomous 3-step sequence on an exterior face of the host Bosuns Locker Max, open to the space environment, to demonstrate repeatable on-orbit fabrication of structural components from metallic wire feedstock and assembly of those components into functional structures. Step 1 is additive metal manufacturing; the system will receive raw aluminum wire from a pre-launched supply depot. It will use this raw material in an electron beam deposition printing head to print standardized structural components while containing loose particles. Step 2 is an assembly of fundamental shapes via electron beam welding. This step involves using a robotic manipulator to clamp, align, and weld the structural panels using ambient vacuum in LEO. Step 3 is quality assurance of the welds using an ultrasonic nondestructive evaluation digital detector across the completed seam and transmitting the information to analysts on Earth. |
|
9:26 AM |
9:40 AM |
Break |
|||
|
9:41 AM |
9:48 AM |
RESTORE |
Virginia Tech |
Track 3: Orbital Servicing |
The team proposes a modular system to inspect and service solar arrays on high-value satellites in geostationary orbit.Using Northrop Grumman’s Mission Robotic Vehicle, the system would assess array deployment and visible condition, identify accessible mechanical problems, and perform targeted servicing to help restore array function. The design would combine inspection sensors with robotic servicing tools tailored to selected client satellites. The team will evaluate attachment requirements, servicing operations, and compatibility with existing array hardware. The mission aims to preserve satellite power generation and extend the useful life of otherwise operational spacecraft. |
|
9:49 AM |
9:56 AM |
Persistent Earth-orbiting GNC, Autonomous Servicing & Uncertainty Solver (PEGASUS) |
University of Cincinnati |
Track 3: Orbital Servicing |
The University of Cincinnati C3 Capstone Team is developing an autonomous satellite servicing architecture that integrates rendezvous and proximity operations with microgravity-resilient cold spray coatings to extend spacecraft operational lifetimes while minimizing overall mission costs.As orbital debris populations grow rapidly, operational satellites face two critical challenges: shielding against hypervelocity impacts and repairing on-orbit structural damage. To address both challenges, our team combines high-fidelity astrodynamics simulations in Ansys STK, lightweight 3D-printed structural layouts, and synthetic vision datasets for autonomous docking pose estimation, alongside experimental validation of cold-spray surface repairs under simulated space conditions. This interdisciplinary approach provides an end-to-end, scalable framework to make on-orbit inspection, dynamic docking, and surface maintenance accessible and economically viable for next-generation orbital servicing. |
|
9:57 AM |
10:04 AM |
AUServicing |
Auburn University |
Track 3: Orbital Servicing |
AUServicing is developing a servicing spacecraft that replaces failing control actuators on client satellites in GEO, extending their mission lifeWith a higher demand for satellites in space, the importance of being able to replace failing components is becoming increasingly more important. The cost to put a satellite into a geosynchronous orbit can cost upwards of $100 million not including the ground equipment and construction of the satellite bus. Using a central base of operations, the satellite will be able to choose tools to go service client satellites in existing GEO orbits and replace its failing actuators. This will effectively extend the lifespan of satellites already in orbit. |
|
10:05 AM |
10:12 AM |
STELLAR |
North Carolina State University |
Track 3: Orbital Servicing |
STELLAR is developing an imaging On-Orbit-Attachable-Component (OAC) platform that will provide visuals for utilizing a multi-tool end effector OAC to install Roll-Out-Solar-Arrays (ROSA) on client Geostationary Earth Orbit (GEO) satellites.The imaging OAC will acquire data that is necessary to facilitate the ROSA installation and will be mounted on the end of a kinematic multi-degree-of-freedom arm. Also, STELLAR is creating an end effector OAC that can have multiple functions, including holding the ROSA in place for installation, placing fasteners, providing required torque to fasteners, and connecting universal electrical plugs. STELLAR’s ultimate goal is to extend the life of GEO satellites by providing a new power source. |
|
10:13 AM |
10:20 AM |
SWARM |
Georgia Institute of Technology |
Track 6: Architecture of Autonomous Space Clusters |
Spacecraft With Autonomous Rendezvous and Manipulation (SWARM) will demonstrate an autonomous settling of a non-cooperative tumbling satellite proving capability to settle critical and costly hardware in a near space future.SWARM will offer novelty over existing solutions like MRV/MEP to prove a generalizable platform for an ambitious future by introducing autonomous cluster agents that can independently sense, make decisions, and plan for intervention to actively settle, without damaging, a non-actively controlled target. |
|
10:21 AM |
10:28 AM |
BroncoLink |
California State Polytechnic University, Pomona |
Track 6: Architecture of Autonomous Space Clusters |
BroncoLink will be developing a rapidly-deployable architecture for lunar communications.This architecture will be a low-cost, repeatable method of rapidly deploying the necessary communications hardware to ensure the success of NASA’s moon base. |
|
10:29 AM |
10:36 AM |
LunarLink |
University of South Florida |
Track 6: Architecture of Autonomous Space Clusters |
LunarLink is developing a resilient wireless communication system that enables reliable connectivity among distributed assets operating on the lunar surface.Lunar terrain features, including craters and ridges, can obstruct direct communication links between habitats, rovers, and scientific instruments, creating communication shadow regions. To address this challenge, LunarLink will investigate an intelligent relay assisted architecture that maintains connectivity by identifying degraded communication links and establishing alternative communication paths through intermediate wireless nodes. The project combines simulation of lunar communication scenarios with a software defined radio (SDR) hardware prototype to evaluate link reliability, communication coverage, and relay-assisted connectivity. Ultimately, LunarLink aims to demonstrate how cooperative wireless nodes can support more reliable and autonomous communications for future lunar exploration missions. |
|
10:37 AM |
10:44 AM |
COSMIC-Miners |
University of Texas at El Paso (UTEP) |
Track 1: Orbital Manufacturing and Assembly |
The project development is an autonomous, toolhead-swapping manufacturing payload for Arkisys Port Module’s Bosun’s Locker that performs 3D printing, soldering, and wire embedding to enable in-space assembly and fabrication within strict volume, mass, and power limits.Building on the year previous, a compact multi-axis motion system paired with interchangeable toolheads, so a single mechanism can print thermoplastic parts, apply solder, and lay conductive wiring without manual reconfiguration. Each subsystem, including thermal management and structural mounting hardware, is being engineered to the Port’s defined interface and resource constraints. Our goal is a versatile, low-cost platform that lowers the barrier to on-orbit manufacturing, giving future missions a practical way to build, repair, and customize hardware directly in space. |
|
10:45 AM |
10:52 AM |
Cal Stat LA COSMIC Team |
California State University, Los Angeles |
Track 2: Lunar Operations |
Develop, prototype, and evaluate a lunar surface preparation rover capable of leveling an FSP reactor installation site and constructing protective berms.The rover will incorporate a modular interface designed to accommodate a microwave sintering tool for reinforcing berm surfaces. The interface will also provide flexibility to support other compatible tools for additional surface preparation operations, while maintaining autonomous lunar operation capabilities. |
|
10:53 AM |
12:59 PM |
Lunch |
|||
|
1:00 PM |
1:07 PM |
Optics with Light Solutions |
Kennesaw State university |
Track 5: In-Space for Earth |
System for Light Activated Protein Production (SLAPP) is a semi autonomous hosted payload that aims to manufacture bacteriorhodopsin artifical retina films within a microgravity enviroment.Research shows that proteins can be produced more efficiently in microgravity due to reduced gravitational effects. The Optics with light solutions team (OWLS) plans to participate in COSMIC Track 5, aiming to remove the need for human assistance by automating the film production process. SLAPP is an automated payload that will produce bacteriorhodopsin-based artificial retina films in microgravity. The payload will operate aboard Spark-1 and utilize layer-by-layer deposition while monitoring and controlling of the protein fluid flow rate, chamber temperature, and humidity to ensure conditions are ideal for uniform protein growth. Automating the production of these protein films in space will improve the manufacturing quality, ultimately leading to an improved expanded use of artificial retinas. |
|
1:08 PM |
1:15 PM |
COSMIC KY |
University of Kentucky |
Track 5: In-Space for Earth |
Team Cosmic intends to design and model an orbital manufacturing payload for the Free Flyer 1 that utilizes a space-adapted processing method to manufacture a magnesium alloy in microgravity.The project will evaluate magnesium processing methods and select a process that can be adapted to the thermal, structural, and operational constraints of the spacecraft. The final concept will include a detailed process design, CAD model of the payload and its internal components, required instrumentation and controls, and an evaluation of the returned material and its potential terrestrial applications. |
|
1:16 PM |
1:23 PM |
UCF-FA27 |
University of Central Florida |
Track 3: Orbital Servicing |
UCF-FA27 is developing a space situational awareness On-orbit Attachable Component (OAC) to allow existing satellites to observe and report nearby orbital activity to the ground station.As the geostationary belt becomes increasingly crowded and contested, operators depend heavily on distant ground tracking that may have limitations in detecting smaller debris and close approaches. Our OAC is designed as a self-contained module that is installed by Northrop Grumman’s Mission Robotic Vehicle, operates independently of its host, and does not need to open the client satellite or connect to its systems. Through onboard optical sensors and an independent communications system, our OAC is planned to detect and characterize nearby objects, provide observations for close approach assessment, and monitor the local space environment for radiation and debris to help explain anomalies. Ultimately, this project aims to turn serviced satellites into distributed observation platforms for a safer geostationary orbital environment. |
|
1:24 PM |
1:31 PM |
Concordia |
Embry-Riddle Aeronautical University, Prescott |
Track 3: Orbital Servicing |
The Embry-Riddle MOSAIC team is designing a docking mechanism that lets on-orbit attachable components (OACs) latch onto all-electric geostationary (GEO) satellites.Today’s life extension hardware docks through a satellite’s liquid apogee engine, but a growing share of new GEO satellites use electric propulsion alone and have no engine to grab. MOSAIC instead grips the launch adapter ring, a hardpoint found on nearly all GEO satellites, so the client needs no modifications. Once attached, MOSAIC confirms a secure connection and carries the OAC’s loads, allowing a servicing vehicle like Northrop Grumman’s MRV to deliver jetpack-style propulsion that restores station-keeping. Our approach opens life extension to the next generation of satellites that would otherwise be retired when their propellant runs out. |
|
1:32 PM |
1:39 PM |
CSUN ISAM |
California State University, Northridge |
Track 2: Lunar Operations |
Our mission is to create a system that has an executive responsibility of creating infrastructure on the lunar surface, including but not limited to radiation protection and dust shielding for humans residing on the moon, by excavating and then processing lunar regolith to enable long-term lunar operations.With a completely autonomous and self learning AI, we intend to first be able to create a landing pad for the nuclear fission reactor to land on. The area will have an already partially built berm surrounding the launch pad that has been built as strong as possible from the inside out, after which the nuclear fission reactor lands, the berm will then be completed around the launch pad from the outside. |
|
1:40 PM |
1:47 PM |
Ducks in Space |
Stevens Institute of Technology |
Track 2: Lunar Operations |
The Stevens team’s Lunar Site Preparation Rover (LSPR) is a semi-autonomous excavator designed to prepare lunar terrain for a Fission Surface Power reactor.Delivered by Astrobotic’s Griffin lander, LSPR uses counter-rotating bucket drums inspired by NASA’s RASSOR to clear and level the reactor site and can pile lunar regolith into a protective berm. A telescoping camera mast allows the rover to survey the terrain and inspect its work. By using locally available regolith for shielding, LSPR reduces the need to transport shielding materials from Earth and helps protect astronauts living near the reactor. |
|
1:48 PM |
1:55 PM |
Astrobulls |
University of South Florida |
Track 2: Lunar Operations |
Our concept is a rover that surveys the lunar surface to identify a feasible site for a fission surface power reactor.It will use a lidar-type sensor to map terrain topography and a bevameter-style instrument to measure soil sinkage under applied pressure and the soil’s shear resistance. It will also carry a bulldozer blade to clear small rocks and level the ground within its capabilities. Ideally, the rover would be fully autonomous, but a mounted camera will let us monitor its operation, evaluate its performance, and take manual control if it gets stuck or encounters a situation it cannot handle. |
|
1:56 PM |
2:03 PM |
Moondust Crusaders |
San Diego State Unversity |
Track 2: Lunar Operations |
The Moondust Crusaders aim to develop an autonomous lunar excavation system consisting of a subsurface Mole Bot and a support rover for regolith collection.The Mole Bot will travel into the lunar regolith and drill a pattern of smaller holes throughout a desired excavation area, breaking up and weakening the compacted material for later bulk removal. As the Mole Bot advances, excavated regolith will be transported toward a collection bucket that can be retrieved and emptied by the support rover. By separating subsurface drilling from material collection, the system aims to provide an efficient method for preparing large excavation areas and reducing the effort required for future lunar construction and infrastructure development. |
|
2:04 PM |
2:20 PM |
Break |
|||
|
2:21 PM |
2:28 PM |
Helluva Hopper |
Georgia Institute of Technology |
Track 2: Lunar Operations |
Our team Helluva Hopper proposes a fleet of eight LiDAR hoppers and two autonomous rovers that rapidly survey a lunar site, choose where to build a base and fission reactor, and later inspect it with X-ray scans.Choosing and validating where to build a lunar base and fission reactor should not take years. We propose a small, low-cost fleet of eight LiDAR hoppers and two autonomous rovers, sharing one Griffin lander within a 200 kg payload. The hoppers leap 50 to 100 meters at a time, scanning mid-flight to build a 3-D terrain map far sharper than orbital imagery: 0.1 m vertical accuracy, slopes within 1°, and rocks down to 0.2 m. That map creates a ranked list of candidate sites. The rovers then drive to the best locations, using ground-penetrating radar and a spectrometer to learn whether the ground can support a reactor and what it’s made of. Once construction initiates, they switch to inspection, using an arm-mounted X-ray to catch hidden cracks and voids in welds and structures. Hence, we help choose the site today and keep it healthy for years to come. |
|
2:29 PM |
2:36 PM |
Astra Works |
Texas A&M – College Station |
Track 2: Lunar Operations |
Through the design of our payload, delivered by the Griffin lander, we aim to characterize, identify, and develop sites on the lunar south pole, either autonomously or with limited human interaction, in order to sustainably lay the groundwork for the future development of a fission surface power reactor and safe human residence.Through the design of our payload, delivered by the Griffin lander, we aim to characterize, identify, and develop sites on the lunar south pole, either autonomously or with limited human interaction, in order to sustainably lay the groundwork for the future development of a fission surface power reactor and safe human residence. |
|
2:37 PM |
2:44 PM |
Boiler Box |
Purdue University |
Track 1: Orbital Manufacturing and Assembly |
Team BoilerBox will use an autonomous assembly system to create flexible chip satellites from the Arkisys Port Module.Current methods to get satellites into space, such as rideshare and dedicated ground launches, are time consuming, complicated, and risky. To tackle this issue, BoilerBox proposes to manufacture chip satellites (PCBs that act alone as micro satellites) that can be customized to fit an organization’s mission. Specific sensors and packages will be positioned and then attached to the chip, then sent to space autonomously. Ultimately, BoilerBox will provide these mission-specific chip satellites on demand while following the mass, volume, and power constraints of the Arkisys Modular Box. |
|
2:45 PM |
2:52 PM |
Engineering In-Orbit Solutions (EOS) |
Kennesaw State university |
Track 1: Orbital Manufacturing and Assembly |
The Engineering In-Orbit Solutions (EOS) Team has developed the Additive Laboratory with In-Space Evaluation and Verification (ALIEN) to advance in-space additive manufacturing through aluminum 3D printing and non-destructive testing.With ALIEN, components can be produced on demand rather than being shipped from Earth, which will reduce the time required to receive replacement parts that are needed in space while ensuring the quality and integrity of the components manufactured. |
|
2:53 PM |
3:00 PM |
COSMIC Tide |
The University of Alabama |
Track 4: In-Space Construction |
COSMIC Tide’s mission is to advance in-space construction by developing a modular system that supports the movement and assembly of building elements across large structures.Drawing on existing research in robotic and modular assembly, our team will explore concepts that make construction in space and on the lunar surface more efficient, adaptable, and reliable. Through research, analysis, and design, we aim to deliver a feasible solution that contributes to the future of sustainable space infrastructure and long-term exploration. |
|
3:01 PM |
3:08 PM |
Conclusion |
